Looking for an easy way to identify your location, decorate your store windows, label your vehicles change out the graphics on your backlit sign?  Cut vinyl lettering and graphics are an easy, affordable way to accomplish that objective.  We cut premium adhesive backed vinyl on our 54” wide plotter.  A vectorized lettering or graphic file is required.  You can provide us a file (LINK TO FILE TYPE) or we can do the layout for your approval.  Our sign software has an extensive library of fonts and shapes or we can scan from an 8.5” x 11” hardcopy.

Adhesive backed vinyl is available in a wide array of colors, in metallics, in reflectives and even translucent films for backlit signs.  If you have a pantone color you need to match, we will advise whether there is a specific match.  If you need a specific match and a vinyl color is not available, we can print the color with our digital printer and plot the file.

When you receive your computer cut vinyl lettering and graphics, it will be on a carrier sheet with a transfer tape on the face.  If you have not installed vinyl before, ask us for a quick lesson.  It is not difficult but does take time and patience.  If the installation area is large, you may want one of our expert installers to do it for you.  We install vinyl every day so don’t hesitate to ask for assistance.

Cut vinyl is removable.  Depending on how long it has been on the surface, it may require a heat gun to soften the vinyl and the adhesive.  If some of the adhesive stays behind, a little adhesive remover will do the trick.  After the vinyl is removed, a shadow may be visible, especially on vehicles.  That is because over time, surfaces exposed to weather and pollution oxidize.  Buffing should remove or minimize the shadow.